24/7 Emergency Tree Service Line · (585) 000-0000

Buffalo · Rochester · Syracuse · Licensed & Insured · Free Estimates

Stump Grinding · Buffalo · Rochester · Syracuse

Stump Grinding That Finishes the Job

A stump is a mower obstacle, a tripping hazard and a home for carpenter ants. We grind it well below the surface, chase the roots that ripple the lawn and leave a level patch you can seed the same afternoon.

Quick answer

How does stump grinding work?

A grinder with a spinning toothed wheel chews the stump into chips, a few inches at a pass, until it sits 6 to 12 inches below the lawn. Surface roots are chased out a few feet so the ground ends up level. The chips are raked into the hole, hauled away or swapped for topsoil. Most stumps take under an hour.

Depth6 to 12 inches below grade, deeper on request
AccessCompact grinders fit through a 36 inch gate
Before we grindA utility locate marks buried gas, electric and communication lines
AfterwardSeed, sod or plant as soon as topsoil goes in
Overview

Stump Grinding done the right way.

A stump is a tripping hazard, a mower obstacle and a home for carpenter ants. Our grinders chew a stump down well below the surface, chase the visible surface roots and leave a mound of mulch or a backfilled, level patch ready to seed.

We have compact grinders for tight gates and side yards and larger machines for big stumps and lot clearing. Most residential stumps are done in under an hour.

What is included

Free estimate

Written, on site and no obligation. Financing available on larger projects*.

Emergency? Call (585) 000-0000, 24/7.

Other services
Pricing

What decides the price of stump grinding?

Stump grinding is priced by diameter, measured across the widest point at ground level including the root flare. One small stump in an open lawn is a quick stop. Price climbs with size, with hardwood species such as oak, with rocks in the soil and with tight access that calls for the compact machine. Several stumps in one visit cost less per stump, and so does adding grinding to a removal.

Cross section of a freshly cut tree stump
How the job runs

Stump Grinding, step by step.

01

Measure and locate

We measure the stump at ground level and call in a utility locate so buried lines are marked.

02

Protect the surroundings

Plywood or guards go up beside fences, siding and windows, and nearby beds get tarped.

03

Grind below grade

The wheel takes the stump down 6 to 12 inches and follows the surface roots outward.

04

Fill and rake

Chips are raked in or hauled, topsoil goes down if you asked for it and the lawn is tidied.

When to call

Signs you need stump grinding.

Mowing around it

A stump in the lawn costs you time every week and dulls mower blades.

Suckers and regrowth

Some species keep sending up shoots until the stump is ground out.

Ants and decay

Rotting stumps attract carpenter ants and fungi that spread to healthy trees.

Planning a project

Fence lines, patios and new plantings all start with a clear, level area.

Where we work

Stump Grinding across Buffalo, Rochester and Syracuse.

Stump Grinding in Buffalo, NY

Stump grinding in Buffalo NY often happens in side yards barely wider than the machine. Our compact grinder reaches back lots in Kenmore, Depew and Lackawanna without lifting a fence panel.

Stump Grinding in Rochester, NY

Stump grinding in Rochester NY regularly follows ash removals in Greece, Henrietta and Webster. We grind the whole row in one visit and backfill so the lawn can be seeded right away.

Stump Grinding in Syracuse, NY

Stump grinding in Syracuse NY is best booked for fall, before stumps vanish under the snow and catch a plow or a snowblower. Clay, Cicero and Camillus keep our grinders busy every October.

Helpful reading

Before you book, read this.

We publish plain language guides so you can make a good decision before anyone climbs a ladder. Start with these, and see what the Dig Safely New York says about why a utility locate comes before any grinding.

Questions

Stump Grinding questions, answered.

Standard grinding goes six to twelve inches below grade, which is enough for lawn, gardens and most plantings. Let us know if you plan to build so we can go deeper.
Yes, after the grindings are removed and the hole is backfilled with topsoil. Many homeowners plant a few feet to the side to avoid the old root mass.
We can leave them as mulch, rake them into the hole or haul them away and backfill with soil. Just tell us your preference when we quote.
Yes. We call in a utility locate before grinding so buried gas, electric and communication lines are marked and protected.
The stump itself will not. A few species, such as poplar, black locust and tree of heaven, can send up shoots from leftover roots for a season or two. Mowing them off is usually all it takes.
Yes. We grind stumps from old removals all the time, including ones cut too high. A tall stump is cut down to the ground first and then ground like any other.
Free estimates

Let us take a look. No pressure, no vague numbers.

Every job starts with a free, written estimate. Financing is available on larger projects*, and our 24/7 emergency line is always answered.

*Financing available on approved credit. Ask for details.

Request a free stump grinding estimate

Tell us about the tree, the property and the best time to reach you. We will call to schedule a free on site estimate.

GHL form embed goes hereReplace this HTML widget's content with your LeadConnector form embed code.Keep one form per page. Give the popup its own form ID so both size correctly.

Prefer to talk? Call (585) 000-0000 any time. Our emergency line is open 24/7.

Free estimate

Tell us about your trees.

Send a few details and we will call to schedule a free on site estimate. Emergencies: call the 24/7 line below.

GHL popup form embed goes hereReplace this HTML widget with the LeadConnector embed for the popup form.Use a separate form ID from the inline page form.

Or call (585) 000-0000 · 24/7 emergency line